rand/sys-boot/u-boot/u-boot-2021.10-rc1.ebuild
2021-07-31 14:41:22 +02:00

77 lines
1.9 KiB
Bash

# Copyright 2021 Gentoo Authors
# Distributed under the terms of the GNU General Public License v2
EAPI=7
MY_PV=$(ver_rs 2 -)
MY_P="${PN}-v${MY_PV}"
DESCRIPTION="Das U-Boot with patches for the Pinebook Pro and NanoPi M4V2."
HOMEPAGE="https://www.denx.de/wiki/U-Boot"
SRC_URI="https://gitlab.denx.de/${PN}/${PN}/-/archive/v${MY_PV}/${PN}-v${MY_PV}.tar.gz -> ${P}.tar.gz"
LICENSE="GPL-2"
SLOT="0"
KEYWORDS="-* arm64"
UBOOT_ALL_DEFCONFIGS=( pinebook-pro-rk3399 nanopi-m4v2-rk3399 )
IUSE="${UBOOT_ALL_DEFCONFIGS[@]/#/uboot_defconfigs_}"
REQUIRED_USE="^^ ( ${IUSE} )"
DEPEND="
sys-apps/dtc
sys-firmware/trusted-firmware-a[tfa_platforms_rk3399]
"
RDEPEND="${DEPEND}"
BDEPEND=""
S="${WORKDIR}/${MY_P}"
uboot_get_defconfig() {
local cfg
for cfg in "${UBOOT_ALL_DEFCONFIGS[@]}"; do
if use "uboot_defconfigs_${cfg}"; then
echo ${cfg}_defconfig
return 0
fi
done
die "no uboot_defconfigs_ set"
}
src_prepare() {
eapply "${FILESDIR}/rk3399-all.boot-order-usb-sd-mmc.patch"
if use uboot_defconfigs_pinebook-pro-rk3399; then
eapply "${FILESDIR}/rk3399-pinebook-pro.power-led.patch"
eapply "${FILESDIR}/rk3399-pinebook-pro.edp-panel-reset.patch"
fi
if use uboot_defconfigs_nanopi-m4v2-rk3399; then
eapply "${FILESDIR}/rk3399-nanopi-m4v2.add.patch"
fi
default
}
src_configure() {
emake $(uboot_get_defconfig)
# for some reason rk3399 fails to jump to a kernel if this is on?!
sed -i -e '/CONFIG_USB_EHCI_HCD=y/d' -e '/CONFIG_USB_EHCI_GENERIC=y/d' .config
}
src_compile() {
emake BL31=/usr/share/trusted-firmware-a/rk3399/bl31.elf
}
src_install() {
insinto /usr/share/u-boot
doins idbloader.img
doins u-boot.itb
}
pkg_postinst() {
elog "To install U-boot:"
elog "Determine your device, then"
elog "dd if=/usr/share/u-boot/idbloader.img of=/dev/... seek=64 conv=notrunc"
elog "dd if=/usr/share/u-boot/u-boot.itb of=/dev/... seek=16384 conv=notrunc"
}